Datasheet
9
AVRPLC16 v6
MikroElektronika
page
A multiplexer is part of the on-board programmer. This circuit enables the programming pins to be disconnected from
the development system while the programming process is in progress, Figure 3.
)LJXUHMultiplexing
In addition to the on-board programmer, the microcontroller can be programmed with the AVR ISP external programmer
that is connected to the development system via the CN45 connector. The JTAG emulator, connected via a 2x5
connector CN46, can also be used for programming.
)LJXUHExternal programmer