Datasheet

16
AVRPLC16 v6
MikroElektronika
page
9.0. GSM module
The Telit’s GSM/GPRS - GM862 module is connected to the development system via the GSM1 connector. Due to this
module, the development system can communicate with remote devices through wireless GSM network. In addition to
the GSM function, the development system may also use the Global Positioning System (GPS).
Figure 9-1: GSM connector
Figure 9-4: Screwing cable into antenna holder
Figure 9-5: Connecting antenna
A
A
Figure 9-2: Connecting Telit’s GM862 module Figure 9-3: Telit’s GM862 module
When the Telit’s module is connected to the development system, it is necessary to screw cables in the appropriate
holders on the development system, Figure 9-4.
B
B
C
C
Unscrew the nut from the screw provided on the cableA
Place the screw with cable into the antenna holder on the development systemB
Screw the nut on the antenna terminalC
When the cable is properly placed into the holder on the development system, it is necessary to screw antenna on the
screw, Figure 9-5.