Datasheet
13
AVRPLC16 v6
MikroElektronika
page
6.0. RS-232 module
The RS-232 module enables the development system to communicate to external devices whose operation is in
compliance with the RS-232 standard. The connection between this module and one of these devices is established
via screw terminals CN4 and CN5, Figure 6-2. In order to turn on this module, it is necessary to set switches 1 and 2
on the DIP switch SW11 to the ON position, Figure 6-3.
)LJXUHRS-232 module connection schematic
Figure 6-1: RS-232 module Figure 6-2: RS-232 connector
Figure 6-3: DIP switch SW11