Datasheet
12
AVRPLC16 v6
MikroElektronika
page
5.0. RS-485 module
The RS-485 module enables the development system to communicate to external devices whose operation is in
compliance with the RS-485 standard. The connection between this module and one of these devices is established
via a screw connector CN10, Figure 5-2. In order to turn on this module, it is necessary to set switches 1,2 and 3 on the
DIP switch SW9 to the ON position, Figure 5-3.
)LJXUHRS-485 module connection schematic
Figure 5-1: RS-485 module Figure 5-2: RS-485 connector
Figure 5-3: DIP switch SW9