Datasheet

4
PICPLC16 v6 Development System
PICPLC16 v6 Development System
MikroElektronika
page
Introduction to PICPLC16 v6 Development System
The PICPLC16 v6™ development system provides a development environment for experimenting with industrial devices. Connection
between the development system and these devices is established by means of relays. In addition, the PICPLC16 v6 features
additional modules which also enable the microcontroller to be connected to external devices. The PICPLC16 v6 may be used as a
stand-alone controller which communicates to remote devices through communication modules. Numerous modules, such as RS-
232 communication module, real-time clock, ethernet controller, GSM module etc. are provided on the board and allow you to easily
experiment with your microcontroller.
Development system may be
used as a stand-alone controller
Development system for PIC
microcontroller based devices
ADC INPUT
ENABLED
ADC INPUT
ENABLED
Four inputs for testing A/D
coverter in 12-bit resolution
Built-in debugger for testing
program being executed in real
time at a hardware level
On-board USB 2.0 programmer
System specifi cation:
Power supply: over the CN1 connector (12-22V AC or 16-30V DC)
Power consumption: 120mA when all on-board modules are off
Dimension: 26,5 x 22cm (10,4 x 8,6inch)
Weight: ~750g (1.65lbs)
Package contains:
Development system: PICPLC16 v6
CD: product CD with relevant software
Cables: USB cable
Documentation: Manuals for PICPLC16 v6, PICfl ash and mikroICD,
quick guide for installing USB drivers and electrical
schematic of the development system
The PICfl ash™ program provides a complete list of all supported microcontrollers.
The latest version of this program with updated list of supported microcontrollers
can be downloaded from our website at www.mikroe.com