Datasheet

10
PICPLC16 v6 Development System
PICPLC16 v6 Development System
MikroElektronika
page
5.0. Power Supply
The PICPLC16 v6 development system is connected to the power supply source via the CN1 connector. The power supply voltage
can be either DC or AC. A DC power supply voltage can be in the range of 16V to 30V, whereas the AC power supply voltage can
range between 12V and 22V. Have in mind that the on-board programmer cannot operate without being connected to the power supply
source although it is connected to a PC via the USB cable.
Figure 5-1: Power supply
Figure 5-2: Power supply connection schematic
Power supply voltage
regulator
POWER SUPPLY switch
Power supply connector CN1