Datasheet

MikroElektronika
2
MCU Cards for BIGAVR6 Development System
The BIGAVR6 development system is supported by empty 64- and 100-pin MCU cards. Schematics provided herein show these MCU
cards with soldered microcontrollers. Instead of microcontrollers used in these examples, you can choose and solder another ones.
Prior to soldering, check which microcontrollers can be placed on the respective MCU card just to be sure that they are compatible.
MCU cards are also provided with pads that enables you to access microcontroller pins when the MCU card is not connected to the
development system.
Supported microcontrollers::
64-pin MCU cards support the following microcontrollers: ATmega32U6, AT90USB64 and AT90USB128
64- and 100-pin MCU cards (MCU Card 1) support the following microcontrollers: AT90CAN32, AT90CAN64, AT90CAN128, ATmega64,
ATmega103, ATmega128, ATmega165, ATmega169, ATmega325, ATmega645, ATmega3250 and ATmega6450.
64- and 100-pin MCU cards (MCU Card 2) support the following microcontrollers: ATmega1281, ATmega2561, ATmega640,
ATmega1280 and ATmega2560.
Figure 1: 64-pin MCU card and microcontroller connection schematic
NOTE: Only one microcontroller may be soldered on the MCU card at the same time.