Datasheet
8
BIG
AVR
6 Development System
MikroElektronika
page
Placing MCU card into the DIMM-168P connector is performed as follows:
([WUDFWLRQOHYHUVXVHGWR¿[
MCU card in the ‘closed’ position
([WUDFWLRQOHYHUVXVHGWR¿[
MCU card in the ‘open’ position
In addition to the MCU card with microcontrollers in 64-pin TQFP package, there are also MCU cards with microcontrollers in 100-pin
TQFP package which can be ordered separately. They are placed into the appropriate connector in the same manner as described
above.
1
A
B
Open extraction levers A and B
2
Place the MCU card into the DIMM-168P connector
3
Push the MCU card down gently into the DIMM-168P connector and
lift extraction levers slowly at the same time
4
Close the extraction levers when the MCU card is properly placed
into the connector