Datasheet
7
BIG
AVR
6 Development System
MikroElektronika
page
2.0. Supported Microcontrollers
The BIGAVR6 development system provides a DIMM-168P connector to place an MCU card into. This development system comes
with an MCU card with the ATMEGA128 microcontroller in 64-pin TQFP package soldered on it, Figure 2-3. Besides, the MCU card
alone provides an oscillator as well as 80 soldering pads connected to microcontroller pins. Each pad is marked the same as the pin
it is connected to. Soldering pads also make connection between the MCU card and target device’s modules easy.
)LJXUHDIMM-168P connector
)LJXUHDIMM-168P connector with the MCU card inserted
)LJXUHMCU card with a 64-pin microcontroller in TQFP package soldered on it
)LJXUHSchematic of the DIMM-168P connector’s pinout
DIMM-168P connector
for placing the MCU
card with microcontroller
in TQFP package