User Manual

P A G E 22
mikromedia 4 for STM32 CAPACITIVE U S E R M A N U A L
PROGRAMMING
P A G E 22
CONNECTIVITY
5.4 1x26 pin headers
Most of the host MCU pins are routed to the two 1x26 pin headers (1), making them available for further connectivity. In addition to MCU pins, some
additional peripheral pins are also routed to this header.
Besides the ability to connect various external devices and peripherals by using wire jumpers, these pins also allow using shields with the additional
mikroBUS
™
sockets. This allows mikromedia 4 to be interfaced with a huge base of different Click boards
™
adding many different functionalities and options,
including motor drivers, buck/boost converters, sensors, and much more. For the complete list of all the Click boards
™
in our offer, please visit the following
link: www.mikroe.com/click
mikromedia 4 for STM32 CAPACITIVE U S E R M A N U A L
5V
GND
PC2
PB0
PC3
PC13
PC0
PG4
PB12
PA4
PB1
PB13
PB14
PB15
GND
PD0
PD1
PA15
PA5
PA6
PB5
TX-N
TX-P
RX-N
RX-P
3.3V
Ground
3.3V pwr.
SPI2
SPI1
ETH
Analog
GPIO
CAN
Ground
5V pwr.
52.
51.
46.
49.
45.
44.
47.
43.
42.
50.
48.
41.
40.
39.
27.
38.
37.
36.
35.
34.
33.
32.
31.
30.
29.
28.
PWM Interrupt I
2
C UART Analog lines SPI
26. RST
25. 3.3V
20. PD12
23. R
19. PD13
18. PB3
21. R
17. PB4
16. PF8
24. L
22. L
15. PF9
14. PG0
13. PG1
1. VDC
12. PG2
11. PG3
10. PF1
9. PF0
8. PC7
7. PC6
6. PA3
5. PD5
4. PB6
3. PB7
2. GND
Ground
VCC-EXT
I2C2
I2C1
UART2
UART1
INTERRUPT
PWM
Audio IN
3.3V pwr.
Reset
Audio OUT
Figure 13: 1x26 pin header view