User Manual

P A G E 18
F u s i o n f o r T I V A v 8 M a n u a l
2x20 display connector
Fusion for TIVA v8 development board features a standardized 2x20-pin display
connector. This connector consists of the 8080 parallel interface, offering support for
displays with up to 8 bits per color (up to 24-bit mode, 16 million colors). Besides the
8080 interface, this connector also contains pins related to touch panel controller,

Make sure to turn off the power supply before placing the display module on
the board. Otherwise, the display module or the board can be permanently
damaged.
interfaced over dedicated I2C bus lines. The power supply rails are also routed to this
connector. Using the standardized pinout ensures compatibility with the existing (i.e.
TFT Board Capacitive line of displays), as well as the future versions of display boards.
More information can be found at www.mikroe.com/manual/tft-boards
1
Figure 9: 2x20-pin board connector view