Datasheet

UARTx_Write
UARTx_Write_Text
539
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroC PRO for AVR
CHAPTER 6
Prototype
void UARTx_Write(char _data);
Returns Nothing.
Description
The function transmits a byte via the UART module.
Parameters :
- _data: data to be sent
Requires
UART HW module must be initialized and communication established before
using this function. See UARTx_Init.
Example
unsigned char _data = 0x1E;
...
UART1_Write(_data);
Prototype
void UARTx_Write_Text(char * UART_text);
Returns Nothing.
Description Sends text (parameter UART_text) via UART. Text should be zero terminated.
Requires
UART HW module must be initialized and communication established before
using this function. See UARTx_Init.
Example
Read text until the sequence “OK” is received, and send back what’s been
received:
UART1_Init(4800); // initialize UART module
Delay_ms(100);
while (1) {
if (UART1_Data_Ready() == 1) { // if data is received
UART1_Read_Text(output, "delim", 10); // reads text until
'delim' is found
UART1_Write_Text(output); // sends back text
}
}