Datasheet

SPI_Glcd_Write_Char
463
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroC PRO for AVR
CHAPTER 6
Prototype
void SPI_Glcd_Write_Char(char chr1, char x_pos, char page_num,
char color);
Returns Nothing.
Description
Prints character on Glcd.
Parameters :
- chr1: character to be written
- x_pos: character starting position on x-axis. Valid values: 0..(127-FontWidth)
-
page_num: the number of the page on which character will be written. Valid
values: 0..7
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the character: 0 white, 1 black,
and 2 inverts each dot.
Note: For x axis and page layout explanation see schematic at the bottom of
this page.
Requires
Glcd needs to be initialized for SPI communication, see SPI_Glcd_Init routines.
Use the SPI_Glcd_Set_Font to specify the font for display; if no font is specified,
then the default 5x8 font supplied with the library will be used.
Example
// Write character 'C' on the position 10 inside the page 2:
SPI_Glcd_Write_Char('C', 10, 2, 1);