Datasheet

Glcd_Write_Char
293
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroC PRO for AVR
CHAPTER 6
Prototype
void Glcd_Write_Char(unsigned short chr, unsigned short x_pos,
unsigned short page_num, unsigned short color);
Returns Nothing.
Description
Prints character on the Glcd.
Parameters :
- chr: character to be written
-
x_pos: character starting position on x-axis. Valid values: 0..(127-Font-
Width)
- page_num: the number of the page on which character will be written.
Valid values: 0..7
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the character: 0 white, 1 black,
and 2 inverts each dot.
Note: For x axis and page layout explanation see schematic at the bottom of
this page.
Requires
Glcd needs to be initialized, see Glcd_Init routine. Use Glcd_Set_Font to specify
the font for display; if no font is specified, then default 5x8 font supplied with the
library will be used.
Example
// Write character 'C' on the position 10 inside the page 2:
Glcd_Write_Char('C', 10, 2, 1);