Datasheet

Glcd_H_Line
Glcd_Rectangle
290
MIKROELEKTRONIKA - SOFTWARE AND HARDWARE SOLUTIONS FOR EMBEDDED WORLD
Libraries
mikroC PRO for AVR
CHAPTER 6
Prototype
void Glcd_H_Line(unsigned short x_start, unsigned short x_end,
unsigned short y_pos, unsigned short color);
Returns Nothing.
Description
Draws a horizontal line on Glcd.
Parameters :
- x_start: x coordinate of the line start. Valid values: 0..127
- x_end: x coordinate of the line end. Valid values: 0..127
- y_pos: y coordinate of horizontal line. Valid values: 0..63
- color: color parameter. Valid values: 0..2
The parameter
color determines the line color: 0 white, 1 black, and 2 inverts
each dot.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
// Draw a horizontal line between dots (10,20) and (50,20)
Glcd_H_Line(10, 50, 20, 1);
Prototype
void Glcd_Rectangle(unsigned short x_upper_left, unsigned short
y_upper_left, unsigned short x_bottom_right, unsigned short
y_bottom_right, unsigned short color);
Returns Nothing.
Description
Draws a rectangle on Glcd.
Parameters :
-
x_upper_left: x coordinate of the upper left rectangle corner. Valid values: 0..127
- y_upper_left: y coordinate of the upper left rectangle corner. Valid values: 0..63
- x_bottom_right: x coordinate of the lower right rectangle corner. Valid values:
0..127
- y_bottom_right: y coordinate of the lower right rectangle corner. Valid values:
0..63
- color: color parameter. Valid values: 0..2
The parameter color determines the color of the rectangle border: 0 white, 1
black, and 2 inverts each dot.
Requires Glcd needs to be initialized, see Glcd_Init routine.
Example
// Draw a rectangle between dots (5,5) and (40,40)
Glcd_Rectangle(5, 5, 40, 40, 1);