Datasheet
MikroElektronika
Figure 1: mikroBuffer PROTO board
Figure 2: mikroBuffer PROTO board connection schematic
How to connect the board?
The mikroBuffer PROTO additional board can be easily connected to a microcontroller via a 1x6 connector CN1.
Connectors CN2 and CN3 are used to establish connection between the board and a device that generates analog
voltage signal to be amplied. The board is powered with 3.3V or 5V DC power supply voltage via the CN4 connector.
mikroBuffer PROTO
The mikroBuffer PROTO additional board is used to amplify an analog voltage signal by using a unity gain amplier.
The amplied signal is then sent to the microcontroller analog inputs.
Key features:
- Analog signal unity gain;
- Low power consumption; and
- 3.3V or 5V power supply voltage.
Figure 3: Dimensions of the board