Datasheet
MikroElektronika
Figure 1: mikroBuffer additional board
How to connect the board?
The mikroBuffer additional board can be easily connected to a microcontroller via an IDC10 connector CN1. Connectors
CN2, CN3, CN4 and CN5 are used to established connection between the board and a device that generates analog
signal to be amplied. The board is powered with 3.3V or 5V DC power supply voltage via the CN6 connector.
mikroBuffer
The mikroBuffer additional board is used to amplify an analog voltage signal by using a unity gain amplier. The
amplied signal is then sent to the microcontroller analog inputs.
Key features:
- Analog signal unity gain;
- Low power consumption; and
- 3.3V or 5V power supply voltage.
Figure 2: Dimensions of the mikroBuffer additional board