Datasheet

MikroElektronika
Potentiometer Board
The Potentiometer board is used for testing analog inputs of the microcontroller supplied on a development system. The board
features eight 10K potentiometers with related jumpers. Connection between the additional board and a development system is
established via a 2x5 connector on the additional board and a 2x5 connector on a development system’s port which has analog pins.
Potentiometers supplied on the additional board are used to adjust voltage levels on the microcontroller’s analog pins. Maximum
voltage level depends on the development system connected to the additional borad and can be either 5V or 3.3V. In case some of
the potentiometers is not used, it is necessary to remove the appropriate jumper (J1-J8).
Figure 1: Potentiometer board
Figure 2: Back of the Potentiometer board
2x5 female connector used for
connection with development systems