User Manual

Page 4
Hexiwear Workstation
PERFECT FOR
LEARNING
The Hexiwear Workstation development
board supports Hexiwear - a wearable
development platform, powered by the
NXP Kinetis K64F MCU, an ARM
®
Cortex
®
M4 MCU working at 120 MHz, with 1M
fl ash and 256K SRAM. Experiment with
ease, observe results on the LEDs, hook
up additional peripherals, or use the
protoboard area to create a custom circuit.
Hexiwear Workstation allows you to
connect Hexiwear to the outside world.
Buttons, LEDs and three headers for
each group of pins, are the connectivity
arsenal you need. The Hexiwear
Workstation expands the possibilities of
Hexiwear itself, allowing all of its pins to
be used in a simple and intuitive way.
Powerful onboard mikroProg OpenSDA
programmer and In-Circuit debugger
can program and debug a docked
Hexiwear. It opens a door to many
possibilities. Once you use an OpenSDA
compatible programmer, you will not be
able to imagine development without it
ever again.
Four additional mikroBUS
™
sockets
allow interfacing with hundreds of
diff erent Click boards
™
. The number
of available Click boards
™
grows daily.
Simply snap in your Click board
™
, and
add a new functionality to your project.
Our engineers provide you with tools
that simplify your development.
HEXIWEAR
WITH WIRES
DEBUGGER
ON BOARD
FOUR mikroBUS
™
SOCKETS
Introduction
In the light of Hexiwear’s global success, we decided to make a full-featured
development board that expands the functionality of your favorite IoT tool. The
Hexiwear Workstation is the next step in rapid IoT prototyping.
We present you a board that is powerful, well organized, featuring high-quality
components, onboard programmer/debugger. The Hexiwear Workstation is ready to
be your strong ally in development. We hope you will enjoy it as much as we do.
Hexiwear Workstation Development Team
INTRODUCTION