User Manual

Page 14
Hexiwear Workstation
PROGRAMMING
Programming Software
Onboard mikroProg programmer requires special programming software
called mikroProg Suite. This software is used to program both K64F and
K40Z devices, and it can be used either as the stand-alone application or
it is automatically launched from within the mikroC PRO, mikroBasic PRO,
or mikroPascal PRO for ARM® compiler, when “build and program” button
is pressed. Software has a clean and intuitive interface, and features the
SingleClick technology, that allows programming with just a single button
click! To begin the mikroProg Suite installation process, first download
the necessary installation file from the product page, on the following
link: www.mikroe.com/hexiwear-workstation
Extract the downloaded archive to a folder, and locate the extracted
executable setup file. Double click on it to start the installation. The
installation wizard offers a guidance through the installation process.
Once the installation of the suite is complete, it is necessary to select
the proper MCU type. This is done by clicking the OPTIONS button from
the main application window, and then selecting the “NXP” item from the
drop-down menu, labeled as “Hardware”. After confirming the settings
with the OK button on the bottom of this window, the board is ready to
be used.
mikroProg Suite for ARM
®
Installation wizard - 6 simple steps
Step 1 - Start Installation
Step 3 - Install for All users
or current user
Step 5 - Installation in progress
Step 2 - Accept EULA and continue
Step 4 - Choose destination folder
Step 6 - Finish Installation