Datasheet

MMC/SD
MikroElektronika
DIP switch SW1 is used to select microcontroller pins to be used for SPI communication.
When the MMC/SD additional board is conected to EasyPIC, LV18F, EasyLV-18F, and BigPIC development systems, the following
switches on the DIP switch SW1 should be set to the ON position:
P4 -> MISO
P5 -> MOSI
P3 -> SCK
For EasyAVR and Easy8051 development systems, the following switches on the DIP switch SW1 should be set to the ON position:
P6 -> MISO
P5 -> MOSI
P7 -> SCk
For the EASYdsPIC development system, the following switches on the DIP switch SW1 should be set to the ON position:
P2 -> MISO
P3 -> MOSI
P6 -> SCK
For the Easy24-33 development system, the following switches on the DIP switch SW1 should be set to the ON position:
P2 -> MISO
P5 -> MOSI
P3 -> SCK