User Manual

Page 4
clicker 2 for PIC18FK is a compact develompent
kit with two mikroBUS
™
sockets for click board
connectivity. You can use it to quickly build your
own gadgets with unique functionalities and
features. It carries the PIC18F67K40, a 8-bit
microcontroller, two indication LEDs, two general
purpose buttons, a reset button, an on/off
switch, a li-polymer battery connector, a micro
USB connector and two mikroBUS
™
sockets.
A mikroProg connector and a 2x26 pinout for
interfacing with external electronics are also
provided. The mikroBUS
™
connector consists of
two 1x8 female headers with SPI, I 2C, UART, RST,
PWM, Analog and Interrupt lines as well as 3.3V,
5V and GND power lines. clicker 2 for PIC18FK
board can be powered over a USB cable.
Introduction to clicker 2 for PIC18FK