User Manual

Page 15
The microcontroller can be programmed with external mikroProg
for PIC programmer and mikroProg Suite for PIC software.
The external programmer is connected to the development
system via 1x5 connector Figure 3-9. mikroProg is a fast USB
2.0 programmer with hardware debugger support. It supports
PIC10®, dsPIC30/33®, PIC24® and PIC32® devices in a single
programmer. It supports over 570 microcontrollers
from Microchip®. Outstanding performance,
easy operation and elegant design are its key
features.
3.3 Programming with mikroProg programmer
Figure 3-9: mikroProg connector
GND
RESET#
PGD
PGC
VCC 3.3V
clicker 2 for
PIC18FK 1x5
programming
headers