Datasheet

6
A motorized development platform
Introduction
For years we have been honing our expertise in designing
powerful and easy to use hardware development tools. Our
reputation was forged, in part, on our range of mikromedia
boards and the ever-growing line of click
™
boards. This time,
we’ve put all that experience to use, and put it on wheels —
the Buggy is a four-wheel robotics workstation that takes
advantage of all the innovations we came up with in
recent years: it employs a clicker 2 / mikromedia pinout that
makes it compatible with a wide range of microcontroller
architectures. Then we added mikroBUS
™
sockets giving
you the choice of over 100 click
™
boards to enhance the
four-wheeler and make it your own with various sensors and
communication boards. We also published a free Android App
for remotely controlling the Buggy and we made the code
available to you. Finally, we took great care to provide you with
the relevant documentation to make it easy to start working
on your Buggy projects right away. Hence this manual. Enjoy.
Package dimensions:
L 277mm, W 232mm, H 56mm
Package weight:
~800-850g
139 mm
5 472.44 mils
42 mm
1 653.54 mils
108.5 mm
4 271.65 mils
61 mm
2 401.57 mils
84 mm
3 307.08 mils
Open source
Android App to
jump-start your
development
Three additional
click
™
board sockets,
additional outputs,
mounting holes
Four-wheel
clicker 2 or
mikromedia
workstation
Power supply
3.7V, 2000mAh LiPo battery