User Manual

Clicker 2 for PIC32MX is a
compact dev. kit with two
mikroBUS
™
sockets for
click
™
board connectivity.
You can use it to quickly
build your own gadgets
with unique functionalities
and features. It carries
the PIC32MX460F512L,
a 32-bit MIPS M4K core
PIC32 microcontroller, two
indication LEDs, two general
purpose buttons, a reset
button, an on/o switch, a
li-polymer battery connector,
a USB Mini-B connector and
two mikroBUS
™
socket. A
mikroProg connector and a
2x26 pinout for interfacing
with external electronics
are also provided. The
mikroBUS
™
connector
consists of two 1x8 female
headers with SPI, I
2
C, UART,
RST, PWM, Analog and
Interrupt lines as well as
3.3V, 5V and GND power
lines. Clicker 2 for PIC32MX
board can be powered over a
USB cable.
power supply
via USB cable
(5V DC)
board dimensions
60.4 x 81 mm
(2.4 x 3.2 inch)
weight
26 g (0. 057 lbs)
Introduction to clicker 2 for PIC32MX
Page 4