User Manual

The microcontroller can be programmed with external
mikroProg
™
for PIC programmer and mikroProg Suite
™
for PIC
®
software. The external programmer is connected
to the development system via 1x5 connector Figure 3-9.
mikroProg
™
is a fast USB 2.0 programmer with hardware
debugger support. It supports PIC10®, dsPIC30/33®, PIC24®
and PIC32® devices in a single programmer. It supports
over 570 microcontrollers from Microchip®.
Outstanding performance, easy operation and
elegant design are its key features.
3.2 Programming with mikroProg
™
programmer
Figure 3-8:
mikroProg
™
connector
You can also
program it
with ICD2®
or ICD3® if
you reroute
the wires like
shown here.
4. GND 5. VCC 3.3V 6. MCLR# 2. PGC 3. PGD 1. NC
GND
MCLR#
PGD
PGC
VCC 3.3V
ICD2/3
programmer
clicker 2 for
PIC32MX 1x5
programming
headers
Page 15