User Manual

Page 11
You can program the microcontroller with bootloader which is
preprogrammed by default. To transfer .hex le from a PC to
MCU you need bootloader software (mikroBootloader USB
HID) which can be downloaded from:
Figure 3-2: USB HID mikroBootloader window
step 1 – Connecting PIC32MX clicker
01
01
To start, connect the USB cable, or if already connected
press the Reset button on your PIC32MX clicker. Click the
Connect button within 5s to enter the bootloader mode,
otherwise existing microcontroller program will execute.
After the mikroBootloader software is downloaded, unzip it
to desired location and start it.
www.mikroe.com/downloads/get/2210/
clicker_2_pic32mx_bootloader_v100.zip
clicker 2 for PIC32MX Bootloader
WinRAR ZIP archive
clicker 2 for PIC32MX Bootloader
File folder
Software
File folder
mikroBootloader USB HID.exe
Bootloader tool for mikroElektron...
mikroElektronika
clicker 2 for PIC32MX PIC32MX460F512L
USB HID Bootloader v1.300.hex
HEX File
Firmware
File folder
3.1 Programming with mikroBootloader