Datasheet

Page 4
clicker 2 for STM32 is a compact dev. kit
with two mikroBUS
™
sockets for click board
connectivity. You can use it to quickly build
your own gadgets with unique functionalities
and features. It carries the STM32F407VGT6,
a 32-bit ARM® Cortex®-M4 microcontroller, two
indication LEDs, two general purpose buttons,
a reset button, an on/o switch, a li-polymer
battery connector, a USB Mini-B connector and
two mikroBUS
™
socket. A JTAG connector and
a 2x26 pinout for interfacing with external
electronics are also provided. The mikroBUS
™
connector consists of two 1x8 female headers
with SPI, I
2
C, UART, RST, PWM, Analog and
Interrupt lines as well as 3.3V, 5V and GND
power lines. Clicker 2 for STM32 board can be
powered over a USB cable.
Introduction to clicker 2 for STM32