Datasheet

The microcontroller can be
programmed with external
mikroProg
™
for STM32
programmer and mikroProg
Suite
™
for ARM
®
software.
The external programmer is
connected to the development
system via 2x5 JTAG
connector soldered on the CN3
connector pads, Figure 3-9.
mikroProg
™
is a fast USB 2.0
programmer with hardware
debugger support. It supports
STM32 M3 and M4 devices
from STMicroelectronics.
Outstanding performance, easy
operation and elegant design
are its key features.
3.2 Programming with mikroProg
™
programmer
Figure 3-9: mikroProg
™
connector
Page 15