Datasheet

Page 4
clicker 2 for PIC18FJ is a compact dev.
kit with two mikroBUS
™
sockets for click
board connectivity. You can use it to
quickly build your own gadgets with unique
functionalities and features. It carries the
PIC18F87J50, a 8-bit microcontroller, two
indication LEDs, two general purpose buttons,
a reset button, an on/o switch, a li-polymer
battery connector, a USB Mini-B connector and
two mikroBUS
™
sockets. A mikroProg connector
and a 2x26 pinout for interfacing with external
electronics are also provided. The mikroBUS
™
connector consists of two 1x8 female headers
with SPI, I
2
C, UART, RST, PWM, Analog and
Interrupt lines as well as 3.3V, 5V and GND
power lines. clicker 2 for PIC18FJ board can be
powered over a USB cable.
Introduction to clicker 2 for PIC18FJ