Datasheet

Page 11
You can program the microcontroller with a
bootloader which is preprogrammed by default.
To transfer .hex le from a PC to MCU you need
bootloader software (mikroBootloader USB HID)
which can be downloaded from:
3.1 Programming with mikroBootloader
Figure 3-2: USB HID mikroBootloader window
step 1 – Connecting clicker 2 for PIC18FJ
01
01
To start, connect the USB cable, or if already connected press the
Reset button on your clicker 2 for PIC18FJ. Click the Connect
button within 5s to enter the bootloader mode, otherwise
existing microcontroller program will execute.
After the mikroBootloader software is downloaded,
unzip it to desired location and start it.
http://www.mikroe.com/downloads/get/2156/
clicker_2_pic18_bootloader.zip
clicker 2 for PIC18FJ Bootloader
WinRAR ZIP archive
clicker 2 for PIC18FJ Bootloader
File folder
Software
File folder
mikroBootloader USB HID.exe
Bootloader tool for mikroElektron...
mikroElektronika
clicker 2 for PIC18FJ P18F87J50 USB
HID Bootloader v1.300.hex
HEX File
Firmware
File folder