User Manual

Page 4
1. What is STM32 M4 clicker?
0502
06 08 10907
0403
Figure 1-1: STM32 M4 clicker
13
01
12
12
11
01
64-pin STM32F415RG MCU
02
Connection pads
03
32.768 KHz crystal oscillator
08
RESET button
05
mikroBUS
™
socket
07
JTAG
Programmer connector
04
16 MHz crystal oscillator
06
3.3V Voltage regulator
09
USB Mini-B connector
10
11
RTC battery pads
Power indication LED
STM32 M4 clicker
is an amazingly compact starter development kit which brings the innovative mikroBUS
™
socket to your favorite
microcontroller. It features STM32F415RG, a 32-bit ARM® Cortex®-M4 microcontroller, two indication LEDs, two general purpose buttons, a
reset button, a USB Mini-B connector and a single mikroBUS
™
socket. A JTAG connector and pads for interfacing with external electronics are
provided as well. The mikroBUS
™
connector consists of two 1x8 female headers with SPI, I
2
C, UART, RST, PWM, Analog and Interrupt lines as
well as 3.3V, 5V and GND power lines. STM32 M4 clicker board can be powered over a USB cable .
12
13
Additional buttons
Additional LEDs