User Manual

Page 10
You can program the microcontroller with a
bootloader which is preprogrammed by default.
To transfer .hex le from a PC to MCU you need
bootloader software (mikroBootloader USB HID)
which can be downloaded from:
Programming with mikroBootloader
Figure 4-2: USB HID mikroBootloader window
step 1 – Connecting STM32 M4 clicker
01
01
To start, connect the USB cable, or if already connected press
the Reset button on your STM32 M4 clicker. Click the Connect
button within 5s to enter the bootloader mode, otherwise
existing microcontroller program will execute.
After the mikroBootloader software is downloaded,
unzip it to desired location and start it.
www.mikroe.com/downloads/get/2144/
mikrobootloader_usb_hid_STM32F415RG.zip