Datasheet

Page 20
8.6. Assigning An Action
When a new command is recorded, it is time to assign it an action. The action will be
performed when the voice command is recognized. Also, a 16-bit index number of the
voice command will be sent via chosen communication interface (UART or USB) .
NONE: When this option is selected, no action will be performed on the
corresponding GPIO pin upon voice command matching.
ON: When this option is selected, a corresponding GPIO pin will be set to logical
high state upon voice command matching.
OFF: When this option is selected, a corresponding GPIO pin will be set to logical
low state upon voice command matching.
TOGGLE: When this option is selected, a corresponding GPIO pin state will be
toggled upon voice command matching.
PULSE: When this option is selected, a train of pulses will be sent to the
corresponding GPIO pin upon voice command matching.
There are five types of action that can be assigned :