Datasheet

MikroElektronika
Figure 1: Serial LCD Adapter additional board
How to connect the board?
The Serial LCD Adapter additional board can be easily connected to a development system via an IDC10 connector
on the additional board and one of 2x5 connectors on the development system’s ports. Connection with LCD display is
established via a 1x16 connector CN2 provided on the additional board.
How to use the board?
The microcontroller supplied on the development system sends data to LCD display via the Serial Peripheral Interface
(SPI). The additional board rst converts this data from serial into parallel format and then sends it to the LCD display.
Potentiometer P1 is used to adjust LCD display contrast.
Here you can nd examples for the Serial LCD Adapter board:
http://www.mikroe.com/eng/products/view/148/serial-lcd-adapter-board/
Serial LCD Adapter
The Serial LCD Adapter additional board is used to connect an LCD display to a development system.
Key features:
- Serial SPI communication;
- Low power consumption; and
- 5V power supply voltage.