Datasheet

Page 4
1. What is PIC clicker?
08
06
01
03
02
07
04
Figure 1-1: PIC clicker
05
11
05
10
10
09
01
USB MINI-B connector
02
3.3V Voltage regulator
03
Power indication LED
08
16 MHz crystal oscillator
05
44-pin PIC18F47J53 microcontroller
07
RESET button
04
mikroProg
™
Programmer connector
06
mikroBUS
™
socket
09
Connection pads
10
11
Additional button
Additional LEDs
PIC clicker is an amazingly compact starter development kit
which brings innovative mikroBUS
™
host socket to your favorite
microcontroller. It features PIC18F47J53, 8-bit microcontroller,
two indication LEDs, two general purpose buttons, reset button,
USB MINI-B connector and a single mikroBUS
™
host socket.
mikroProg connector and pads for interfacing with external
electronics are provided as well. mikroBUS
™
host connector
consists of two 1x8 female headers with SPI, I
2
C, UART, RST,
PWM, Analog and Interrupt lines as well as 3.3V, 5V and GND
power lines. PIC clicker board can be powered over USB cable .
On-board power circuitry generates 3.3V and 5V. Power diode
(GREEN) indicates the presence of power supply.