Datasheet

Page 10

You can program the microcontroller with bootloader which is

preprogrammed by default. To transfer .hex le from a PC to

MCU you need bootloader software (mikroBootloader USB

HID) which can be downloaded from:

Programming with mikroBootloader

Figure 4-2: USB HID mikroBootloader window

step 1 – Connecting PIC clicker

To start, connect the USB cable, or if already connected

press the Reset button on your PIC clicker. Click the

Connect button within 5s to enter the bootloader mode,

otherwise existing microcontroller program will execute.

After the mikroBootloader software is downloaded, unzip it to

desired location and start it.

http://www.mikroe.com/downloads/get/2039/

mikrobootloader_usb_hid_pic18f47j53.zip