click ™ USB adapter Connect the desired Click™ additional board directly to your PC via USB cable. No microcontrollers required.
TO OUR VALUED CUSTOMERS I want to express my thanks to you for being interested in our products and for having confidence in MikroElektronika. The primary aim of our company is to design and produce high quality electronic products and to constantly improve the performance thereof in order to better suit your needs. Nebojsa Matic General Manager The FT2232H and Windows® logos and product names are trademarks of FTDI Chip® and Microsoft® in the U.S.A. and other countries.
Table of Contents Introduction ����������������������������������������������������������������������������������������������������������������������������������������� 4 Schematic ��������������������������������������������������������������������������������������������������������������������������������������������� 5 Install drivers before use ����������������������������������������������������������������������������������������������������������������� 6 Click boards are plug and play! ����������
Introduction 09 08 07 01 TX/RX indication LED 02 USB MINI-B connector 03 Power indication LED 01 04 I2C/UART jumper (J1) 02 05 06 05 FT2232H IC 06 mikroBUS™ socket 07 VIN/BC0 jumper (J2) 03 08 MCP3204 ADC converter 09 EEPROM memory 04 Click USB adapter board provides necessary interface for connecting Click™ add-on boards to your PC through high speed USB connection. There is no need to use a microcontroller.
3.3V VOLTAGE REGULATOR 100nF LD29080DT33 10uF 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 E2 FP1 12MHz C14 22pF R1 12K1 USBD_N USBD_P FP2 VPLL RST/EN R8 27 R9 27 USBD_N USBD_P VIN BC0 AN ADB1 J2 VCC3V3 CS SDI SDO SCK VCC5 R2 100K AN BC1 CS SCK SDI SDO ADBUS1 ADBUS2 ADBUS3 VCCIO ADBUS4 ADBUS5 ADBUS6 ADBUS7 GND ACBUS0 ACBUS1 ACBUS2 ACBUS3 ACBUS4 VCCIO ACBUS5 FP3 FERRITE ADB0 BD4 AN RST CS SCK SDO SDI +3.
Install drivers before use On-board FT2232H chip requires drivers to be installed on your PC before operation. Drivers are available on the manufacturer’s website: http://www.ftdichip.com/Drivers/VCP.
Click boards are plug and play! Up to now, MikroElektronika has released more than 60 mikroBUS™ compatible Click Boards™. On the average, one click board is released per week. It is our intention to provide you with as many add-on boards as possible, so you will be able to expand your development board with additional functionality. Each board comes with a set of working example codes. Please visit the Click boards™ webpage for the complete list of currently available boards: http://www.mikroe.
Dimensions 73.66 mm (2900 mils) 7.62 mm (300 mils) 69.60 mm (2740 mils) Page 8 20.32 mm (800 mils) 31.62 mm (1245 mils) 27.56 mm (1085 mils) 11.93 mm (470 mils) 5.54 mm (218 mils) 11.93 mm (470 mils) 7.77 mm (306 mils) 7.
Notes: Page 9
Notes: Page 10
DISCLAIMER All the products owned by MikroElektronika are protected by copyright law and international copyright treaty. Therefore, this manual is to be treated as any other copyright material. No part of this manual, including product and software described herein, may be reproduced, stored in a retrieval system, translated or transmitted in any form or by any means, without the prior written permission of MikroElektronika.
If you want to learn more about our products, please visit our web site at www.mikroe.com If you are experiencing some problems with any of our products or just need additional information, please place your ticket at www.mikroe.com/support If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.com Click USB Adapter Manual ver. 1.
