Datasheet

11
Note 4: Definition of contrast ratio.( Test LCD using DMS501)
( )
dotsselectednonofBrightness
dotsselectedofBrightness
CrratioContrast
-
=
Note 5: Definition of Response time. (Test LCD using DMS501):
The output signals of photo detector are measured when the input signals are changed
from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively.
The response time is defined as the time interval between the 10% and 90% of
amplitudes.Refer to figure as below.
A-TOPS ELECTRONICS COMPANY