Datasheet

Page 4
The mikromedia+ for PIC32MX7
®
is a compact development
system which allows development of devices with multimedia
contents. The central part of the system is a 32-bit 100-pin
PIC32MX795F512L microcontroller. The mikromedia+ for
PIC32MX7
®
feature lots of on board modules such as stereo
MP3 codec, 4.3’’ TFT 480x272 touch screen display, port
expander, accelerometer, microSD card slot, buzzer, IR receiver,
RGB LED diode, PIN photodiode, temperature sensor, 2.4GHz
RF transceiver, Ethernet transceiver, 8 Mbit ash memory,
Li-Polimer battery charger etc. The board also contains MINI-B
USB connector, power screw terminals, 2x5 mikroProg
™
connector, two 1x26 connection pads, ON/OFF switch and
other. It comes pre-programmed with USB HID bootloader, but
can also be programmed with mikroProg
™
for PIC
®
, dsPIC
®
and
PIC32
®
external programmer. mikromedia is compact and slim,
and perfectly ts in the palm of your hand, which makes it a
convenient platform for mobile and other multimedia devices.
We have also prepared a mikromedia+ SHIELD for PIC32MX7
®
extension board which enables you to easily expand the
functionality of your board.
Introduction to mikromedia+ for PIC32MX7
®
System Specication
power supply
Via USB cable (5V DC) or via screw
terminals (5 - 12V DC)
power consumption
65mA with erased MCU
(when on-board modules are inactive)
board dimensions
119.54 x 78mm (4.71 x 3.07inch)
weight
~115g (0.253lbs)