Datasheet

Page 10

Microcontroller is pre-programmed with USB HID Bootloader,

which can be used to upload new device rmware. To transfer

rmware .HEX le from a PC to MCU you need to use mikroBoot-

loader USB HID application, which can be downloaded from:

Upon download, unzip it to desired location and start the mikro-

Bootloader application:

Programming with mikroBootloader

Figure 3-2: USB HID mikroBootloader window

step 1 – Connecting mikromedia

In order to start, connect the USB cable or (if already

connected) press the Reset button on your mikromedia+

board. Click the Connect button within 5s to enter the

bootloader mode, otherwise the existing microcontroller

program will be executed.

http://www.mikroe.com/downloads/get/2031/mikro-

media_plus_pic32mx7_bootloader.zip