Datasheet

MikroElektronika
LCD Adapter Additional Board
The LCD Adapter additional board is used to connect the pins of the microcontroller provided on the development system to a 2x16
LCD or a 4x20 LCD. The additional board is connected to a development system via a 2x5 female connector provided on the at
cable, whereas a 1x16 male connector provided on the additional board enables connection with an LCD display. In addition to this
connector, there is also a potentiometer used for the display backlight regulation provided on the board.
Figure 1: LCD Adapter additional board
Figure 4: LCD Adapter additional board connection schematic
2x5 female connector
with a at cable
Figure 3: LCD Adapter additional board connected to a development system
Figure 2: LCD Adapter board’s back view
1x16 male connector