Datasheet

© 2011 Microchip Technology Inc. DS61143H-page 169
PIC32MX3XX/4XX
FIGURE 29-7: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS
FIGURE 29-8: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
TABLE 29-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
TABLE 29-25: INPUT CAPTURE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +105°C for V-Temp
Param.
No.
Symbol Characteristics
(1)
Min. Max. Units Conditions
IC10 T
CCL ICx Input Low Time [(12.5 ns or 1TPB)/N]
+ 25 ns
— ns Must also
meet
parameter
IC15.
N = prescale
value (1, 4, 16)
IC11 T
CCH ICx Input High Time [(12.5 ns or 1TPB)/N]
+ 25 ns
—ns
Must also
meet
parameter
IC15.
IC15 T
CCP ICx Input Period [(25 ns or 2TPB)/N]
+ 50 ns
—ns —
Note 1: These parameters are characterized, but not tested in manufacturing.
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +105°C for V-Temp
Param.
No.
Symbol Characteristics
(1)
Min. Typical
(2)
Max. Units Conditions
OC10 T
CCF OCx Output Fall Time — — — ns See parameter DO32.
OC11 T
CCR OCx Output Rise Time — — — ns See parameter DO31.
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
ICx
IC10 IC11
IC15
Note: Refer to Figure 29-1 for load conditions.
OCx
OC11
OC10
(Output Compare
Note: Refer to Figure 29-1 for load conditions.
or PWM Mode)