Datasheet

PIC32MX3XX/4XX
DS61143H-page 156 © 2011 Microchip Technology Inc.
Module Differential Current (Continued)
DC43 — 1100 μA-40°C
2.5V ADC: ΔI
ADC (Notes 3, 4, 6)
DC43a — 1100 μA +25°C
DC43b — 1000 μA +85°C
DC43h — 1200 µA +105ºC
DC43c 880 — μA—— ADC: ΔI
ADC (Notes 3, 4)
DC43e — 1100 μA-40°C
3.6V ADC: ΔI
ADC (Notes 3, 4)
DC43f — 1100 μA +25°C
DC43g — 1000 μA +85°C
DC43i — 1200 µA +105ºC
TABLE 29-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +105°C for V-Temp
Parameter
No.
Typical
(2)
Max. Units Conditions
Note 1: Base I
PD is measured with all digital peripheral modules disabled. All I/Os are configured as inputs and
pulled low. WDT and FSCM are disabled.
2: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: The Δ current is the additional current consumed when the module is enabled. This current should be added
to the base I
PD current.
4: Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5: Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6: This parameter is characterized, but not tested in manufacturing.