Datasheet

PIC32MX3XX/4XX
DS61143H-page 154 © 2011 Microchip Technology Inc.
TABLE 29-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +105°C for V-Temp
Parameter
No.
Typical
(2)
Max. Units Conditions
Idle Current (I
IDLE): Core OFF, Clock ON Base Current (Note 1)
DC30 — 5 mA -40ºC, +25ºC, +85ºC 2.3V
4 MHz
DC30a 1.4 — mA -40ºC, +25ºC, +85ºC —
DC30b — 5 mA -40ºC, +25ºC, +85ºC
3.6V
DC30c — 8 mA +105ºC
DC31 — 15 mA -40ºC, +25ºC, +85ºC 2.3V
20 MHz
(Note 3)
DC31a 13 — mA -40ºC, +25ºC, +85ºC —
DC31b — 17 mA -40ºC, +25ºC, +85ºC
3.6V
DC31c — 25 mA +105ºC
DC32 — 22 mA -40ºC, +25ºC, +85ºC 2.3V
60 MHz
(Note 3)
DC32a 20 — mA -40ºC, +25ºC, +85ºC —
DC32b — 25 mA -40ºC, +25ºC, +85ºC
3.6V
DC32c — 32 mA +105ºC
DC33 — 29 mA -40ºC, +25ºC, +85ºC 2.3V
80 MHz
DC33a 24 — mA -40ºC, +25ºC, +85ºC —
DC33b — 32 mA -40ºC, +25ºC, +85ºC
3.6V
DC33c — 40 mA +105ºC
DC34 — 36 µA -40°C
2.3V
LPRC (31 kHz)
(Note 3)
DC34a — 62 µA +25°C
DC34b — 392 µA +85°C
DC34c — 550 µA +105ºC
DC35 35 — µA -40°C
3.3V
DC35a 65 — µA +25°C
DC35b 242 — µA +85°C
DC35c 350 — µA +105ºC
DC36 — 43 µA -40°C
3.6V
DC36a — 106 µA +25°C
DC36b — 414 µA +85°C
DC36c — 600 µA +105ºC
Note 1: The test conditions for base I
DLE current measurements are as follows: System clock is enabled and
PBCLK divisor = 1:8. CPU in Idle mode (CPU core halted). Only digital peripheral modules are enabled
(ON bit = 1) and being clocked. WDT and FSCM are disabled. All I/O pins are configured as inputs and
pulled to V
SS. MCLR = VDD.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
3: This parameter is characterized, but not tested in manufacturing.