User manual

The PF MCU CARD 2 is shown on Figure 1. It contains dsPIC33FJ256GP710A microcontroller with on-chip peripherals and is a great choice for both beginners and
professionals. After testing and building the nal program, this card can also be taken out of the board socket and used in your nal device.
Card information
dsPIC33FJ256GP710A has 40 MIPS CPU speed, 256K bytes of program
memory (ash), 30K bytes of data memory. It has 85 General purpose I/O
pins, 9 16-bit timers, 2 ADC (32 ch), 2 UARTs, internal 7.37 MHz and 512 kHz
oscillators, 2 I2C, 2 SPI and 2 CAN controllers. It also contains programming and
debugging interface.
8MHz crystal oscillator. We carefully chose the most convenient crystal
value that provides clock frequency which can be used directly, or with the PLL
multipliers to create higher MCU clock value. MCU card also contains 32.768 kHz
crystal oscillator which provides external clock waveform for RTCC module.
2
1
1
2
Figure 1: MCU card with dsPIC33FJ256GP710A
page 2
v7