Datasheet

dsPIC33FJXXXGPX06A/X08A/X10A
DS70593D-page 350  2009-2012 Microchip Technology Inc.
Section 25.0 “Electrical Characteristics” Removed Note 4 from the DC Temperature and Voltage
Specifications (see Table 25-4).
Updated the maximum value for parameter DI19 and added
parameters DI28, DI29, DI60a, DI60b, and DI60c to the I/O Pin Input
Specifications (see Table 25-9).
Removed Note 2 from the AC Characteristics: Internal RC Accuracy
(see Table 25-18).
Updated the characteristic description for parameter DI35 in the I/O
Timing Requirements (see Table 25-20).
Updated the ADC Module Specification minimum values for
parameters AD05 and AD07, and updated the maximum value for
parameter AD06 (see Table 25-41).
Added Note 1 to the ADC Module Specifications (12-bit Mode) (see
Table 25-42).
Added Note 1 to the ADC Module Specifications (10-bit Mode) (see
Table 25-43).
Added DMA Read/Write Timing Requirements (see Table 25-46).
Section 26.0 “High Temperature Electrical
Characteristics”
Updated all ambient temperature end range values to +150ºC
throughout the chapter.
Updated the storage temperature end range to +160ºC.
Updated the maximum junction temperature from +145ºC to +155ºC.
Updated the maximum values for High Temperature Devices in the
Thermal Operating Conditions (see Table 26-2).
Added Note 3 and updated the ADC Module Specifications (12-bit
Mode), removing all parameters with the exception of HAD33a (see
Table 26-16).
Added Note 3 and updated the ADC Module Specifications (10-bit
Mode), removing all parameters with the exception of HAD33b (see
Table 26-17).
TABLE B-2: MAJOR SECTION UPDATES (CONTINUED)
Section Name Update Description