Datasheet

dsPIC33FJXXXGPX06A/X08A/X10A
DS70593D-page 326  2009-2012 Microchip Technology Inc.
TABLE 26-9: INTERNAL LPRC ACCURACY
TABLE 26-10: SPIx MASTER MODE (CKE = 0) TIMING REQUIREMENTS
TABLE 26-11: SPIx MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS
AC
CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +150°C for High Temperature
Param
No.
Characteristic Min Typ Max Units Conditions
LPRC @ 32.768 kHz
(1)
HF21 LPRC -70
(2)
—+70
(2)
%-40°C  TA  +150°C
Note 1: Change of LPRC frequency as V
DD changes.
2: Characterized but not tested.
AC
CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +150°C for High Temperature
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
HSP35 TscH2doV,
TscL2doV
SDOx Data Output Valid after
SCKx Edge
—1025ns —
HSP40 TdiV2scH,
TdiV2scL
Setup Time of SDIx Data Input
to SCKx Edge
28 — — ns —
HSP41 TscH2diL,
TscL2diL
Hold Time of SDIx Data Input
to SCKx Edge
35 — — ns —
Note 1: These parameters are characterized but not tested in manufacturing.
AC
CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +150°C for High Temperature
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
HSP35 TscH2doV,
TscL2doV
SDOx Data Output Valid after
SCKx Edge
—1025ns —
HSP36 TdoV2sc,
TdoV2scL
SDOx Data Output Setup to
First SCKx Edge
35 — — ns —
HSP40 TdiV2scH,
TdiV2scL
Setup Time of SDIx Data Input
to SCKx Edge
28 — — ns —
HSP41 TscH2diL,
TscL2diL
Hold Time of SDIx Data Input
to SCKx Edge
35 — — ns —
Note 1: These parameters are characterized but not tested in manufacturing.