Datasheet

 2009-2012 Microchip Technology Inc. DS70593D-page 325
dsPIC33FJXXXGPX06A/X08A/X10A
26.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
dsPIC33FJXXXGPX06A/X08A/X10A AC
characteristics and timing parameters for high
temperature devices. However, all AC timing
specifications in this section are the same as those in
Section 25.2 “AC Characteristics and Timing
Parameters”, with the exception of the parameters
listed in this section.
Parameters in this section begin with an H, which
denotes High temperature. For example, parameter
OS53 in Section 25.2 “AC Characteristics and
Timing Parameters” is the Industrial and Extended
temperature equivalent of HOS53.
TABLE 26-7: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 26-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 26-8: PLL CLOCK TIMING SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +150°C for High Temperature
Operating voltage V
DD range as described in Table 26-1.
VDD/2
CL
RL
Pin
Pin
VSS
VSS
CL
RL = 464
C
L = 50 pF for all pins except OSC2
15 pF for OSC2 output
Load Condition 1
– for all pins except OSC2 Load Condition 2 – for OSC2
AC
CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +150°C for High Temperature
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
HOS53 D
CLK CLKO Stability (Jitter)
(1)
-5 0.5 5 % Measured over 100 ms
period
Note 1: These parameters are characterized, but are not tested in manufacturing.