Datasheet

dsPIC33FJXXXGPX06A/X08A/X10A
DS70593D-page 274  2009-2012 Microchip Technology Inc.
TABLE 25-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
(3)
Typical
(2)
Max Units Conditions
Operating Current (I
DD)
(1)
DC20d 27 30 mA -40°C
3.3V 10 MIPS
DC20a 27 30 mA +25°C
DC20b 27 30 mA +85°C
DC20c 27 35 mA +125°C
DC21d 36 40 mA -40°C
3.3V 16 MIPS
DC21a 37 40 mA +25°C
DC21b 38 45 mA +85°C
DC21c 39 45 mA +125°C
DC22d 43 50 mA -40°C
3.3V 20 MIPS
DC22a 46 50 mA +25°C
DC22b 46 55 mA +85°C
DC22c 47 55 mA +125°C
DC23d 65 70 mA -40°C
3.3V 30 MIPS
DC23a 65 70 mA +25°C
DC23b 65 70 mA +85°C
DC23c 65 70 mA +125°C
DC24d 84 90 mA -40°C
3.3V 40 MIPS
DC24a 84 90 mA +25°C
DC24b 84 90 mA +85°C
DC24c 84 90 mA +125°C
Note 1: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode with PLL, OSC1 is driven with external square wave from
rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.
3: These parameters are characterized but not tested in manufacturing.